{"title":"Modular Mount System","description":"\u003cp\u003eBuild the perfect mount for your setup. The Outcamp Modular Mount System uses interchangeable 1.5\" ball components — pick a base, add an arm, attach your device. Every piece connects to every other piece, so you can customise the reach, angle, and attachment method to suit your vehicle, boat, or workstation.\u003c\/p\u003e\u003cp\u003eAll components use the industry-standard 1.5\" (38mm) ball size, compatible with RAM Mounts C-size and other major mounting systems. Made from marine-grade aluminium with powder-coat finish — built for Australian conditions.\u003c\/p\u003e\u003cp\u003eShips Australia-wide. Need help choosing? \u003ca href=\"\/pages\/contact-us\"\u003eGet in touch\u003c\/a\u003e and we will help you build the right setup.\u003c\/p\u003e","products":[{"product_id":"1-5-ball-double-socket-arm-15cm-5-9","title":"Outcamp 1.5 Inch Ball Double Socket Arm 15cm | Modular Mount | Australia","description":"\u003cp\u003e\u003cstrong\u003eThe 15cm double socket arm is the most versatile mid-length option in the Modular Mount System.\u003c\/strong\u003e It connects any two 1.5\" (38.1mm) C-size ball components — a base at one end, a device holder at the other — giving you 150mm of adjustable reach between them. Built from marine-grade aluminium with a durable powder-coated finish, it handles salt spray, vibration, and harsh conditions without issue. Built by Outcamp for Australian conditions.\u003c\/p\u003e\n\n\u003cp\u003eDual ball sockets with a centre tension knob let you dial in the exact angle and lock it down firmly. Each joint offers full 360-degree rotation, so positioning your fish finder, chartplotter, tablet, or any other device is fast and intuitive — even in tight spaces on a boat console or 4x4 dash.\u003c\/p\u003e\n\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e15cm (5.9\") arm length:\u003c\/strong\u003e The go-to middle-length option — long enough for comfortable reach, short enough to maintain stability under vibration.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e360-degree adjustability:\u003c\/strong\u003e Ball-and-socket joints at both ends provide infinite angle combinations for precise device positioning.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMarine-grade aluminium construction:\u003c\/strong\u003e Lightweight yet strong, with excellent corrosion resistance for marine, 4x4, and outdoor environments.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePowder-coated finish:\u003c\/strong\u003e Available in Black or White — durable coating resists scratches, chips, and UV degradation.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStainless steel hardware:\u003c\/strong\u003e Includes S.S spring, S.S screw bolt, and S.S gasket for long-lasting clamping force and corrosion resistance.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNylon tension knob:\u003c\/strong\u003e Easy to grip and adjust by hand — no tools required for angle changes in the field.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShockproof and vibration resistant:\u003c\/strong\u003e Designed to hold firm on rough roads, choppy water, and heavy equipment.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eC-size compatible:\u003c\/strong\u003e Works with all 1.5\" ball mount systems including RAM-compatible bases, holders, and adapters.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBall size:\u003c\/strong\u003e 1.5\" (38.1mm) C-size\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eArm length:\u003c\/strong\u003e 150mm (5.9\")\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Marine-grade aluminium body, stainless steel hardware\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Powder-coated (Black or White)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e All 1.5\" C-size ball bases, holders, and adapters\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e2x Aluminium arm halves\u003c\/li\u003e\n  \u003cli\u003e1x Stainless steel spring\u003c\/li\u003e\n  \u003cli\u003e1x Stainless steel screw bolt\u003c\/li\u003e\n  \u003cli\u003e1x Nylon gasket\u003c\/li\u003e\n  \u003cli\u003e1x Stainless steel gasket\u003c\/li\u003e\n  \u003cli\u003e1x Nylon tension knob\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eIn the Field\u003c\/h4\u003e\n\u003cp\u003eMount your fish finder at the perfect viewing angle on the boat, position a tablet on the 4x4 dash for navigation, or set up a chartplotter on the centre console. The 15cm arm gives you enough reach to clear obstacles and position devices comfortably without the wobble that comes with longer arms. Paired with a ball base and device holder from the Modular Mount System, you have a complete adjustable mounting solution.\u003c\/p\u003e\n\n\u003cp\u003ePart of the \u003ca href=\"\/collections\/modular-mount-system\"\u003eModular Mount System\u003c\/a\u003e. Ships Australia-wide.\u003c\/p\u003e","brand":"Outcamp","offers":[{"title":"Black","offer_id":45419725619391,"sku":"OC-C-15A","price":39.95,"currency_code":"AUD","in_stock":true},{"title":"White","offer_id":45419725652159,"sku":"OC-C-15A-WHITE","price":39.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0250\/0532\/6384\/files\/50b6633056.jpg?v=1774739323"},{"product_id":"long-arm-double-socket-mount-230mm-1-5-ball","title":"Long Arm Double Socket Mount — 230mm (1.5\" Ball, RAM \/ Arkon \/ iBOLT Compatible)","description":"\u003cp\u003eThe 230mm Long Arm Double Socket Mount gives you the extra reach the standard arms can't — perfect for stretching a fish finder across a wide boat console, positioning a tablet within easy reach from the driver seat in a 4WD or truck cab, or mounting a phone or GPS past dash obstructions and trim panels.\u003c\/p\u003e\n\n\u003cp\u003eLike every arm in the Outcamp Modular Mount System, it uses dual 1.5\" (C-size) ball sockets with a centre tension knob for fully adjustable, near-infinite positioning. Loosen the knob to swing and angle the arm, then tighten it down for a rock-solid hold that won't shift on corrugated outback tracks or rough water.\u003c\/p\u003e\n\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong 230mm reach:\u003c\/strong\u003e The longest arm in the C-size modular system — for when standard 87mm or 153mm arms don't quite stretch where you need them.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine-grade aluminium body:\u003c\/strong\u003e Lightweight, corrosion resistant, finished in tough black powder coating — built for salt air, rain, dust and UV.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 1.5\" (C-size) ball sockets:\u003c\/strong\u003e Standard RAM Mounts compatible. Pairs with any C-size ball base or device cradle in the Outcamp Modular Mount System (and works with Arkon and iBOLT C-size components too).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentre tension knob:\u003c\/strong\u003e One knob locks both ball joints. Loosen, position, tighten — near-infinite angle and rotation control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless steel hardware:\u003c\/strong\u003e S.S. spring, screw bolt and gasket inside the body for long-term reliability in marine and coastal use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHolds firm under vibration:\u003c\/strong\u003e Spring-loaded clamp design keeps the joint tight on washboard tracks, boat chop and rough water.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eTotal length: 230mm (9.1\") between ball socket centres\u003c\/li\u003e\n\u003cli\u003eBall socket size: 1.5\" (38.1mm) — C-size, RAM Mounts compatible\u003c\/li\u003e\n\u003cli\u003eBody material: marine-grade aluminium with black powder coat finish\u003c\/li\u003e\n\u003cli\u003eInternal hardware: stainless steel spring, screw bolt and gasket\u003c\/li\u003e\n\u003cli\u003eKnob: nylon T-handle, hand tight (no tools)\u003c\/li\u003e\n\u003cli\u003eCompatibility: any 1.5\"\/C-size ball base, mount or cradle — works with Outcamp Modular Mount System, RAM Mounts, Arkon and iBOLT C-size components\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eWhat's in the Box\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e1 x 230mm long arm double socket arm (assembled with knob, spring, bolt and gaskets)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eUse Cases\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBoat consoles — stretch a fish finder from rail mount to driver view\u003c\/li\u003e\n\u003cli\u003e4WD and truck cabs — bring a tablet or phone within thumb-reach of the steering wheel\u003c\/li\u003e\n\u003cli\u003eCaravans and motorhomes — position a tablet or screen from a wall mount to viewing angle\u003c\/li\u003e\n\u003cli\u003eTractors, forklifts and farm machinery — mount work tablets, scanners or comms past cab obstructions\u003c\/li\u003e\n\u003cli\u003eWorkshops — extend a screen, scanner or display from the wall over the bench\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003ePart of the \u003ca href=\"\/collections\/modular-mount-system\"\u003eOutcamp Modular Mount System\u003c\/a\u003e. Mix and match arms, balls, bases and cradles in 1\", 1.5\" and 2.25\" (B \/ C \/ D) sizes. Ships Australia-wide.\u003c\/p\u003e","brand":"Outcamp","offers":[{"title":"Default Title","offer_id":45419725684927,"sku":"OC-C-23A","price":49.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0250\/0532\/6384\/files\/long-arm-double-socket-01-hero.jpg?v=1777804397"},{"product_id":"round-amps-ball-mount-base-1-5-ball-white-aluminium","title":"Round AMPS Ball Mount Base — 1.5\" Ball, White Powder-Coated Aluminium (RAM Compatible)","description":"\u003cp\u003eThe Round AMPS Ball Mount Base in \u003cstrong\u003ewhite powder coat\u003c\/strong\u003e is a clean, low-profile way to add a 1.5\" (C-size) ball connection point to any flat surface. The crisp white finish is purpose-made for white-finish boats, dinghies, RVs, caravans, light-coloured dashboards and clinical or medical equipment fit-outs — anywhere a black mount would stand out as an eyesore.\u003c\/p\u003e\n\n\u003cp\u003eBolt it down using the industry-standard AMPS hole pattern (or the additional 3-hole 120-degree pattern), and you have a rock-solid foundation for any C-size arm or device cradle in the Outcamp Modular Mount System.\u003c\/p\u003e\n\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean white finish:\u003c\/strong\u003e Medical-grade white powder coat — ideal for marine, caravan and clinical settings where a discreet, light-coloured mount matters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAMPS hole pattern:\u003c\/strong\u003e 4-hole 30 x 38mm pattern fits the industry-standard AMPS bolt spacing — works with most AMPS-compatible brackets and adapters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdditional 7-aperture pattern:\u003c\/strong\u003e 5mm holes plus a 3-hole 120-degree spacing at 46mm diameter for alternative mounting options.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-profile, compact:\u003c\/strong\u003e Round plate sits flat and close to the mounting surface for a clean, unobtrusive look.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine-grade aluminium:\u003c\/strong\u003e Lightweight, corrosion resistant, finished in tough powder coat for harsh marine, coastal and outback conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.5\" (C-size) ball:\u003c\/strong\u003e Standard RAM Mounts compatible. Pairs with any C-size double socket arm or device cradle in the Outcamp Modular Mount System (and works with Arkon and iBOLT C-size components too).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePlate diameter: approx 61.84mm (2.43\")\u003c\/li\u003e\n\u003cli\u003eAMPS hole spacing: 30 x 38mm (1.18\" x 1.50\")\u003c\/li\u003e\n\u003cli\u003eSecondary 3-hole pattern: 120-degree spacing on 46mm diameter\u003c\/li\u003e\n\u003cli\u003eBolt holes: 5mm\u003c\/li\u003e\n\u003cli\u003eBall size: 1.5\" (38.1mm) — C-size, RAM Mounts compatible\u003c\/li\u003e\n\u003cli\u003eBody material: marine-grade aluminium alloy with white powder coat finish\u003c\/li\u003e\n\u003cli\u003eBall material: industrial rubber over aluminium core (white)\u003c\/li\u003e\n\u003cli\u003eCompatibility: any 1.5\"\/C-size double socket arm or cradle — works with Outcamp Modular Mount System, RAM Mounts, Arkon and iBOLT C-size components\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eUse Cases\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBoats, kayaks and dinghies — bolt to a flat deck or bulkhead for a fish finder, GPS, phone or rod holder mount. White finish blends in with white-finish gel coat.\u003c\/li\u003e\n\u003cli\u003eCaravans, camper trailers and RVs — mount a tablet, screen or work light to a white internal wall or external panel without standing out.\u003c\/li\u003e\n\u003cli\u003eLight-coloured 4WD and ute dashboards — clean look on white, beige or cream interiors.\u003c\/li\u003e\n\u003cli\u003eMedical, dental and clinical equipment — suits hospital trolleys, dental rigs and clinic fit-outs where a clean, sanitary appearance matters.\u003c\/li\u003e\n\u003cli\u003eWorkshop and studio — mount a screen, scanner, light or display to a white workbench, panel or photography rig.\u003c\/li\u003e\n\u003cli\u003eOffice, home and garage — mount a tablet, phone holder or display under a white shelf or on a desk panel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003ePart of the \u003ca href=\"\/collections\/modular-mount-system\"\u003eOutcamp Modular Mount System\u003c\/a\u003e. Mix and match arms, balls, bases and cradles in 1\", 1.5\" and 2.25\" (B \/ C \/ D) sizes. Ships Australia-wide.\u003c\/p\u003e","brand":"Outcamp","offers":[{"title":"Default Title","offer_id":45419725750463,"sku":"VIN-C-003-WHITE","price":24.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0250\/0532\/6384\/files\/round-amps-ball-mount-white-01-hero.jpg?v=1777808254"},{"product_id":"short-double-socket-arm-87mm-1-5-ball-white-aluminium","title":"Short Double Socket Arm — 87mm, 1.5\" Ball, White Powder-Coated Aluminium (RAM Compatible)","description":"\u003cp\u003eThe 87mm short double socket arm is the compact bridge in the 1.5\" C-size mount system. When you need a tight install — a screen pinned close to the dash, a tablet against a yacht console, or a phone tucked beside the windscreen — the short arm keeps everything rigid and out of the way.\u003c\/p\u003e\n\u003cp\u003eFinished in \u003cstrong\u003emedical-grade white powder coat over marine-grade aluminium\u003c\/strong\u003e, it suits clean interiors that need to look as good as they perform: white-trim caravans, RVs, motor cruisers and yachts, medical and dental rigs, and clean-industrial workshops where matte black would clash.\u003c\/p\u003e\n\u003ch3\u003eWhat you get\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 87mm (3.4\") socket-to-socket — the short option in the 1.5\" C-series\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e marine-grade aluminium, white powder coat (anti-corrosion, UV-stable)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSockets:\u003c\/strong\u003e twin 1.5\" C-size cups, RAM™ B-Size pattern compatible\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdjustment:\u003c\/strong\u003e 360° horizontal, 180° vertical at each ball\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLocking knob:\u003c\/strong\u003e oversized white T-handle — tighten by hand, no tools\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e short arm + locking knob + spring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere it earns its keep\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eYachts and motor cruisers — matches gelcoat and white interiors\u003c\/li\u003e\n  \u003cli\u003eCaravans, motorhomes and slide-on campers with white cabinetry\u003c\/li\u003e\n  \u003cli\u003eDash-mount tablets, GPS units and fish finders that need to sit close to the helm\u003c\/li\u003e\n  \u003cli\u003eMedical, dental and clean-room equipment carts where stainless and white are the norm\u003c\/li\u003e\n  \u003cli\u003eRoof-rack and bull-bar accessories that need to bridge two 1.5\" balls without adding length\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePairs with\u003c\/h3\u003e\n\u003cp\u003eUse this arm with any 1.5\" (C-size) ball base or device adapter from the \u003ca href=\"\/collections\/modular-mount-system\"\u003eModular Mount System\u003c\/a\u003e. White ball bases pair cleanly for an all-white build; black bases work too if you want a two-tone look.\u003c\/p\u003e\n\u003cp\u003eIf you need more reach, the 150mm long version of this arm is also available in white through the same collection.\u003c\/p\u003e\n\u003ch3\u003eCare\u003c\/h3\u003e\n\u003cp\u003eWipe with a damp cloth. Powder coat is salt-spray and UV resistant — safe for marine environments. Avoid solvents that strip paint.\u003c\/p\u003e","brand":"Outcamp","offers":[{"title":"Default Title","offer_id":45419726504127,"sku":"VIN-C-8.7A-WHITE","price":34.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0250\/0532\/6384\/files\/short-double-socket-arm-white-01-hero.jpg?v=1777810918"},{"product_id":"double-u-bolt-handlebar-rail-mount-base-1-5-ball","title":"Double U-Bolt Handlebar \/ Rail Mount Base — 1.5\" Ball (Motorcycle, Bike, Forklift, Roll Cage)","description":"\u003cp\u003eThe Double U-Bolt Mount Base gives you a permanent 1.5\" ball attachment point on any round pipe or rail between 19mm and 31mm in diameter — motorcycle handlebars, push-bike bars, forklift cab rails, 4WD roll cages, boat grab rails, kayak side rails, scaffolding, even warehouse cage uprights. Two stainless steel U-bolts loop under the bar and clamp the marine-grade aluminium body down hard, so once it is installed it does not move.\u003c\/p\u003e\n\u003cp\u003eThe 1.5\" (38mm) ball on top is the standard C-size used by RAM Mounts and the rest of the Outcamp Modular Mount System. Pair it with any C-size double socket arm and a C-size cradle — phone or tablet holder, GPS unit, fish-finder, action camera mount, or AMPS plate.\u003c\/p\u003e\n\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine-grade aluminium body:\u003c\/strong\u003e Powder-coat finished, sturdy and corrosion-resistant for outdoor and saltwater use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble U-bolt clamping:\u003c\/strong\u003e Two 304 stainless steel U-bolts (4 contact points) lock the base solidly to round bars — no slipping, no rattling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.5\" (C-size) ball:\u003c\/strong\u003e RAM Mounts compatible. Pairs with any C-size arm and cradle in the Outcamp Modular Mount range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide bar range:\u003c\/strong\u003e Fits round bars 19mm to 31mm in diameter — covers most pushie \/ motorbike handlebars, kayak rails, boat grab rails, forklift cab tubing and 4WD roll cages.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-axis adjustment:\u003c\/strong\u003e Once paired with a double socket arm, the ball gives 360° horizontal rotation and 180° tilt for full pan and angle control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustrial rubber ball:\u003c\/strong\u003e Sand-finish ball head holds tight in the socket arm without slipping.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAll-stainless hardware:\u003c\/strong\u003e Stainless U-bolts, nyloc nuts, washers and rubber thread covers — built for vibration and weather.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBall size: 1.5\" (38.1mm) — C-size, RAM Mounts compatible\u003c\/li\u003e\n\u003cli\u003eClamp range: 19mm to 31mm round bar diameter (default style, no pad)\u003c\/li\u003e\n\u003cli\u003eBody: marine-grade aluminium, powder-coat finish\u003c\/li\u003e\n\u003cli\u003eU-bolts: 304 stainless steel, 1\/4\"-20 thread, 32.2mm inside width, 63.6mm length\u003c\/li\u003e\n\u003cli\u003eHardware: 4 x stainless nyloc nuts, 4 x stainless washers, 4 x rubber thread covers\u003c\/li\u003e\n\u003cli\u003eBody footprint: approx. 63.5mm x 52.6mm\u003c\/li\u003e\n\u003cli\u003eBall: industrial rubber, sand-finish non-slip\u003c\/li\u003e\n\u003cli\u003eFits round bars only\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eWhat's in the Box\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Aluminium body with 1.5\" ball (factory-fitted)\u003c\/li\u003e\n\u003cli\u003e2 x 304 stainless steel U-bolts\u003c\/li\u003e\n\u003cli\u003e4 x stainless steel nyloc nuts\u003c\/li\u003e\n\u003cli\u003e4 x stainless steel washers\u003c\/li\u003e\n\u003cli\u003e4 x rubber thread cap covers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eThe 1.5\" ball is the standard C-size used by RAM Mounts and the Outcamp Modular Mount System. Pair this base with any C-size double socket arm and a C-size device holder — phone or tablet cradle, GPS holder, fish-finder cradle, AMPS plate, or a 1.5\"-ball-to-1\/4\" camera adapter for GoPro \/ DJI Action \/ Insta360.\u003c\/p\u003e\n\n\u003ch4\u003eWhere it works\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMotorcycle, e-bike and pushie handlebars\u003c\/li\u003e\n\u003cli\u003eForklift cab rails and warehouse equipment tubing\u003c\/li\u003e\n\u003cli\u003e4WD roll cages, snorkel uprights and bull-bar tube\u003c\/li\u003e\n\u003cli\u003eKayak side rails and boat grab rails\u003c\/li\u003e\n\u003cli\u003eCaravan and camper trailer rails\u003c\/li\u003e\n\u003cli\u003eScaffolding, workshop pipe and shop fittings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003ePart of the \u003ca href=\"\/collections\/modular-mount-system\"\u003eOutcamp Modular Mount System\u003c\/a\u003e. Ships Australia-wide.\u003c\/p\u003e","brand":"Outcamp","offers":[{"title":"Default Title","offer_id":45419726536895,"sku":"VIN-C-006","price":29.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0250\/0532\/6384\/files\/u-bolt-mount-01-hero.jpg?v=1777803004"},{"product_id":"square-post-clamp-mount-base-1-5-ball-fits-posts-to-103mm","title":"Square Post Clamp Mount Base — 1.5\" Ball, Fits RHS Square Tube up to 103mm (Utes\/Forklift \/ Industrial \/ Marine)","description":"\u003cp\u003eThe Square Post Clamp Mount Base lets you bolt a 1.5\" (C-size) ball mount to any square or rectangular post up to 103mm (4\") wide — without drilling into the post itself. Two long through-bolts run from the upper plate down through a lower clamp plate, sandwiching the post tight between them. Perfect for forklift cab posts, warehouse scanners, scaffolding rails, marine rails, roll cages, RV and trailer posts, and agricultural machinery uprights.\u003c\/p\u003e\n\n\u003cp\u003eLike every mount in the Outcamp Modular Mount System, the ball is a standard 1.5\" (C-size) and pairs with any C-size double socket arm or device cradle — including RAM Mounts, Arkon and iBOLT C-size components. Mount a tablet, phone, GPS, fish finder, scanner or work light wherever you need it.\u003c\/p\u003e\n\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits posts up to 103mm (4\") wide:\u003c\/strong\u003e Designed for square and rectangular posts — forklift cab uprights, scaffolding tubes, roll cage bars, marine rails, agricultural machinery posts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo drilling required:\u003c\/strong\u003e Two long through-bolts clamp the upper plate to the lower plate, sandwiching the post between — no holes drilled into the post itself.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.5\" (C-size) ball:\u003c\/strong\u003e Standard RAM Mounts compatible. Pairs with any C-size double socket arm or device cradle in the Outcamp Modular Mount System (and works with Arkon and iBOLT C-size components too).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine-grade aluminium body:\u003c\/strong\u003e Lightweight, corrosion resistant, finished in tough black powder coating — built for salt air, rain, dust, UV and warehouse abuse.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless steel hardware:\u003c\/strong\u003e Long through-bolts and washers in stainless steel for long-term reliability in marine, coastal and industrial environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHolds firm under vibration:\u003c\/strong\u003e Two-bolt clamp design keeps the mount tight on forklifts, work vehicles and rough water.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum post width: 103mm (4\")\u003c\/li\u003e\n\u003cli\u003eBall size: 1.5\" (38.1mm) — C-size, RAM Mounts compatible\u003c\/li\u003e\n\u003cli\u003eBody material: marine-grade aluminium with black powder coat finish\u003c\/li\u003e\n\u003cli\u003eHardware: stainless steel through-bolts, nuts and washers\u003c\/li\u003e\n\u003cli\u003eWeight capacity: approx 1.8kg (4 lb) standard load, 1.4kg (3 lb) recommended for heavy vibration use\u003c\/li\u003e\n\u003cli\u003eMounting: two long through-bolts — no drilling into post required\u003c\/li\u003e\n\u003cli\u003eCompatibility: any 1.5\"\/C-size double socket arm or cradle — works with Outcamp Modular Mount System, RAM Mounts, Arkon and iBOLT C-size components\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eWhat's in the Box\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e1 x square post clamp upper plate (with 1.5\" ball)\u003c\/li\u003e\n\u003cli\u003e1 x lower clamp plate\u003c\/li\u003e\n\u003cli\u003e2 x long stainless steel through-bolts with nuts and washers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eUse Cases\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eForklift cab posts — mount tablets, scanners, work phones or comms devices in warehouses and distribution centres\u003c\/li\u003e\n\u003cli\u003eWarehouse and factory scaffolding — clamp scanners, tablets or work lights to scaffold uprights without drilling\u003c\/li\u003e\n\u003cli\u003e4WD and truck roll cages — mount a phone, GPS or UHF mic to a square cage bar\u003c\/li\u003e\n\u003cli\u003eMarine rails and posts — mount a fish finder, GPS or phone to a square rail or post on boats and pontoons\u003c\/li\u003e\n\u003cli\u003eRV, caravan and trailer posts — mount a tablet, screen or light to internal or external square posts\u003c\/li\u003e\n\u003cli\u003eAgricultural machinery — clamp work tablets, GPS guidance screens or scanners to tractor cab uprights and harvester posts\u003c\/li\u003e\n\u003cli\u003eWorkshop benches and frames — mount a screen, scanner or display to a square frame member\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003ePart of the \u003ca href=\"\/collections\/modular-mount-system\"\u003eOutcamp Modular Mount System\u003c\/a\u003e. Mix and match arms, balls, bases and cradles in 1\", 1.5\" and 2.25\" (B \/ C \/ D) sizes. Ships Australia-wide.\u003c\/p\u003e","brand":"Outcamp","offers":[{"title":"Default Title","offer_id":45419726569663,"sku":"VIN-CD-CCB02-1.5","price":35.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0250\/0532\/6384\/files\/square-post-clamp-mount-base-01-hero.jpg?v=1777805658"},{"product_id":"tough-claw-handlebar-mount-base-1-5-ball-quick-release","title":"Tough-Claw Mount Base — 1.5\" Ball, Quick-Release (GoPro \/ Action Camera \/ Tablet)","description":"\u003cp\u003eThe Tough-Claw is a quick-release clamping base for any rod or rail between 26mm and 53mm in diameter — handlebars, roll cages, kayak rails, boat rails, ski-rack bars, scaffolding, even ag tractor cabs. Twist the knob, drop it on the bar, twist again and it locks. No tools, no drilling, no permanent fixings.\u003c\/p\u003e\n\u003cp\u003eThe 1.5\" (38mm) ball on top is the standard C-size used by RAM Mounts and the rest of the Outcamp Modular Mount System, so once it is on the bar you can clip on a C-size double socket arm and any C-size cradle — phone, tablet, GPS unit, fish finder, action camera mount, AMPS plate.\u003c\/p\u003e\n\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool-free quick release:\u003c\/strong\u003e Hand-tightened knob clamps and releases in seconds — move it between bikes, kayaks or vehicles without unscrewing fittings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide bar range:\u003c\/strong\u003e Fits round or square rails from 26mm to 53mm diameter — covers most pushie \/ motorbike handlebars, kayak rails, boat grab rails and 4WD roll cages.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.5\" (C-size) ball:\u003c\/strong\u003e RAM Mounts compatible. Pairs with any C-size arm and cradle in the Outcamp Modular Mount range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy-duty construction:\u003c\/strong\u003e Imported German nylon body, 304 stainless steel through-bolt and industrial rubber ball — built for vibration and weather.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternal rubber grip:\u003c\/strong\u003e Anti-slip rubber pad inside the jaws stops the clamp rotating on smooth pipes, even in the rain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAction-camera ready:\u003c\/strong\u003e Pair with a 1.5\" ball-to-1\/4\" thread adapter to mount a GoPro, DJI Action or Insta360 directly on a handlebar.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-axis adjustment:\u003c\/strong\u003e Rotates 360° on the rail and the ball gives full pan\/tilt at the device end.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBall size: 1.5\" (38.1mm) — C-size, RAM Mounts compatible\u003c\/li\u003e\n\u003cli\u003eClamp range: 26mm to 53mm rod\/rail diameter\u003c\/li\u003e\n\u003cli\u003eBody: imported German nylon\u003c\/li\u003e\n\u003cli\u003eThrough-bolt: 304 stainless steel\u003c\/li\u003e\n\u003cli\u003eBall: industrial rubber, sand-finish non-slip\u003c\/li\u003e\n\u003cli\u003eInternal jaw lining: rubber non-slip pad\u003c\/li\u003e\n\u003cli\u003eOverall height (assembled): approx. 145mm\u003c\/li\u003e\n\u003cli\u003eBody width: approx. 49mm\u003c\/li\u003e\n\u003cli\u003eStatic load capacity: 3–5kg (Large Tough-Claw)\u003c\/li\u003e\n\u003cli\u003eFits round or square rails\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eWhat's in the Box\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Tough-Claw clamp body\u003c\/li\u003e\n\u003cli\u003e1 x 1.5\" ball head (factory-fitted)\u003c\/li\u003e\n\u003cli\u003eStainless steel hand-knob bolt\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eThe 1.5\" ball is the standard C-size used by RAM Mounts and the Outcamp Modular Mount System. Pair this base with any C-size double socket arm and a C-size device holder — phone or tablet cradle, GPS holder, fish-finder cradle, AMPS plate, or a 1.5\"-ball-to-1\/4\" camera adapter for GoPro \/ DJI Action \/ Insta360.\u003c\/p\u003e\n\n\u003ch4\u003eWhere it works\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePushie \/ e-bike \/ motorbike handlebars\u003c\/li\u003e\n\u003cli\u003e4WD roll cages, snorkel uprights and bull-bar tube\u003c\/li\u003e\n\u003cli\u003eKayak side rails and boat grab rails\u003c\/li\u003e\n\u003cli\u003eCaravan and camper trailer rails\u003c\/li\u003e\n\u003cli\u003eSki roof-rack bars and surf-rack uprights\u003c\/li\u003e\n\u003cli\u003eWorkshop pipes, scaffolding and forklift cabs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003ePart of the \u003ca href=\"\/collections\/modular-mount-system\"\u003eOutcamp Modular Mount System\u003c\/a\u003e. Ships Australia-wide.\u003c\/p\u003e","brand":"Outcamp","offers":[{"title":"Black","offer_id":45419727814847,"sku":"VIN-C-011","price":39.95,"currency_code":"AUD","in_stock":true},{"title":"White","offer_id":45419727847615,"sku":"VIN-C-011-WHITE","price":39.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0250\/0532\/6384\/files\/tough-claw-mount-01-hero.jpg?v=1777802387"},{"product_id":"triple-suction-cup-mount-base-1-5-ball-heavy-duty","title":"Triple Suction Cup Mount Base — 1.5\" Ball, Heavy Duty (Tablet \/ GPS \/ Phone)","description":"\u003cp\u003eThis triple-cup suction mount is a no-drill, heavy-duty base for tablets, GPS units, large phones and small displays. Three industrial-rubber vacuum cups spread the load across a 240mm triangular footprint, and a press-bar lever on each cup pulls a vacuum that holds firm on smooth glass and other non-porous surfaces. The 1.5\" (38mm) ball on top accepts any C-size arm, including RAM Mounts and other Outcamp Modular Mount components.\u003c\/p\u003e\n\u003cp\u003eBuilt for vehicles, boats, caravan windows and workstations where you cannot or do not want to drill. The triple-cup layout resists vibration and shake far better than a single-cup mount, so it is the pick when you are running a tablet on a 4WD touring rig, a chartplotter on a boat windscreen, or a heavier device on a workstation panel.\u003c\/p\u003e\n\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo-drill installation:\u003c\/strong\u003e Vacuum mounts straight onto glass or any smooth, non-porous surface — no permanent fixings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTriple-cup stability:\u003c\/strong\u003e Three 86mm suction cups in a 240mm triangle distribute load and resist road vibration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy-duty load rating:\u003c\/strong\u003e Up to 3–5kg in the triple configuration — suitable for tablets, GPS units, fish finders and small displays.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustrial rubber cups:\u003c\/strong\u003e Heat- and cold-resistant rubber stays flexible from -20°C to 60°C, so it holds in summer heat and a Top End winter morning alike.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress-bar vacuum lock:\u003c\/strong\u003e Lift the lever, place on glass, press down to lock. Lift again to release. Re-positionable as many times as you need.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless-steel triangular plate:\u003c\/strong\u003e Connects the three cups and the ball base into one rigid assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal 1.5\" (C-size) ball:\u003c\/strong\u003e Works with any C-size double socket arm and device holder, including RAM Mounts and the rest of the Outcamp Modular Mount System.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBall size: 1.5\" (38mm) — C-size, RAM Mounts compatible\u003c\/li\u003e\n\u003cli\u003eFootprint: 240mm x 240mm triangle (140mm cup-to-cup spacing)\u003c\/li\u003e\n\u003cli\u003eSuction plate diameter: 86mm per cup\u003c\/li\u003e\n\u003cli\u003eMount height: 90mm (50mm cup body + ball)\u003c\/li\u003e\n\u003cli\u003eCups: 3 x industrial rubber vacuum suction cups with press-bar lock\u003c\/li\u003e\n\u003cli\u003eCentre plate: stainless steel triangle\u003c\/li\u003e\n\u003cli\u003eStandard load capacity: 1.5kg\u003c\/li\u003e\n\u003cli\u003eHeavy-duty load capacity: 3–5kg\u003c\/li\u003e\n\u003cli\u003eOperating temperature: -20°C to 60°C\u003c\/li\u003e\n\u003cli\u003eMaintenance: cups can be rinsed with water\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eWhat's in the Box\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Stainless-steel triangular plate\u003c\/li\u003e\n\u003cli\u003e3 x Vacuum suction cups with press-bar levers\u003c\/li\u003e\n\u003cli\u003e1 x 1.5\" round ball base\u003c\/li\u003e\n\u003cli\u003eMounting screws\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eThe 1.5\" ball is the standard C-size used by RAM Mounts and the Outcamp Modular Mount System. Pair this base with any C-size double socket arm and a C-size device holder (tablet cradle, phone cradle, AMPS plate, GPS holder, fish-finder cradle) to build a complete mount.\u003c\/p\u003e\n\n\u003ch4\u003eWhere it works\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e4WD windscreens for touring tablets and GPS units\u003c\/li\u003e\n\u003cli\u003eBoat windscreens, hatches and cabin glass for chartplotters and tablets\u003c\/li\u003e\n\u003cli\u003eCaravan windows for an off-grid entertainment tablet\u003c\/li\u003e\n\u003cli\u003eSmooth workstation panels and roller-door glass for monitor mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003ePart of the \u003ca href=\"\/collections\/modular-mount-system\"\u003eOutcamp Modular Mount System\u003c\/a\u003e. Ships Australia-wide.\u003c\/p\u003e","brand":"Outcamp","offers":[{"title":"Default Title","offer_id":45419727880383,"sku":"VIN-C-016","price":80.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0250\/0532\/6384\/files\/triple-suction-mount-01-front.jpg?v=1777800335"},{"product_id":"twist-lock-dual-suction-cup-mount-base-38mm-ball","title":"Twist-Lock Dual Suction Cup Mount Base with 38mm Ball","description":"\u003cp\u003eA heavy-duty twin suction-cup base for our Modular Mount System. Two large rubber suction cups with twist-lock vacuum levers grip securely to any clean glass surface — windscreens, side windows, glass cabinets, boat consoles, caravan windows or workshop bench protectors — and an integrated 38mm (1.5″) rubber ball lets you connect any of our 38mm ball-arm components to mount tablets, phones, GPS units, lights, action cameras and more.\u003c\/p\u003e\n\n\u003cp\u003eThe dual-cup design more than doubles the holding force of a single suction mount, so you can run heavier devices and longer arm extensions without sag. Twist-lock levers create a positive vacuum seal in seconds, and the indicator on each lever lets you see at a glance if the seal is still holding. When you’re done, flip the levers and lift it off — no residue, no marks.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eTwin vacuum suction cups with twist-lock levers — heavy-duty grip on glass\u003c\/li\u003e\n  \u003cli\u003eIntegrated 38mm (1.5″) rubber ball, compatible with industry-standard 1.5″ ball-arm systems (RAM, iBOLT, Arkon and our Outcamp Modular Mount System)\u003c\/li\u003e\n  \u003cli\u003eStainless steel centre plate, German-grade nylon suction housings\u003c\/li\u003e\n  \u003cli\u003eTool-free install and removal — leaves no marks on glass\u003c\/li\u003e\n  \u003cli\u003eHolding capacity: 1 kg standard \/ 2 kg heavy-duty when both cups are correctly seated\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFootprint:\u003c\/strong\u003e 226 mm × 86 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 90 mm (with ball)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBall size:\u003c\/strong\u003e 38.1 mm (1.5″)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSuction cup spacing:\u003c\/strong\u003e 226 mm centre-to-centre\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentre plate:\u003c\/strong\u003e stainless steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSuction housings:\u003c\/strong\u003e German-grade nylon\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMounting surface:\u003c\/strong\u003e any clean, smooth, non-porous glass or polished panel\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat’s in the box\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 × Twist-Lock Dual Suction Cup Mount Base with 38mm ball\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003eTip: for the strongest seal, clean the glass with a microfibre cloth and a drop of metho or window cleaner before mounting. Press both levers down firmly until the suction-indicator window shows a full vacuum.\u003c\/em\u003e\u003c\/p\u003e","brand":"Outcamp","offers":[{"title":"Default Title","offer_id":45419727913151,"sku":"OC-TLDS-015","price":59.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0250\/0532\/6384\/files\/twist-lock-dual-suction-mount-01-hero.jpg?v=1777848738"},{"product_id":"1-5-ball-camera-thread-adapter-1-4-20","title":"1\/4\"-20 Threaded Stud Mount Base \u0026mdash; 1.5\" Ball, C-Size (Action Camera \/ Tripod \/ GoPro Compatible)","description":"\u003cp\u003eThe 1\/4″-20 threaded stud is the bridge piece that drops any camera, tripod plate, or action-cam adapter into the C-size 1.5″ ball-mount ecosystem. Fixed to the back of the ball is a stainless-steel 1\/4″-20 male stud — the universal photo-tripod thread — so anything with a 1\/4″-20 socket on its base will screw straight on.\u003c\/p\u003e\n\n\u003ch3\u003eBuilt for the bush, the boat, and the ute\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003ePair it with a windscreen suction cup, dash bracket, or roll-cage clamp from the C-size range and you have a full mount in two pieces.\u003c\/li\u003e\n  \u003cli\u003eMount a dash camera or 360° camera to your 4WD windscreen for trip recording on remote tracks.\u003c\/li\u003e\n  \u003cli\u003eRun a fish finder, GPS plotter, or chart-light on the boat — any device with a tripod thread on the base will fit.\u003c\/li\u003e\n  \u003cli\u003eUse it as a tripod-to-bar adapter for action cams, gimbals, or compact mirrorless bodies on a roll cage, awning pole, or roof rack.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStud thread\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\/4″-20 UNC male, stainless steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBall size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.5″ (38.1 mm) C-size\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOverall height\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e60 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBody material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eImported German nylon, rubber-coated ball\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWorks with any C-size 1.5″ double-socket arm and base — including RAM Mounts B-size sockets and our full Modular Mount System range\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFinish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMatte black, UV stable\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat is C-size?\u003c\/h3\u003e\n\u003cp\u003eC-size is the industry-standard 1.5″ ball used by the larger end of modular mount systems. The bigger ball gives extra holding torque versus the smaller B-size 1″ ball — ideal for cameras, fish finders, and any kit where a knock or corrugation could shift a smaller mount.\u003c\/p\u003e\n\n\u003ch3\u003eWhat you get\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 × 1.5″ ball with 1\/4″-20 stainless steel stud\u003c\/li\u003e\n  \u003cli\u003eRubber-coated ball for shock absorption and grip inside the socket arm\u003c\/li\u003e\n  \u003cli\u003eCompatible with all standard 1.5″ (C-size) double-socket arms — including RAM Mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003eShipped from our Australian warehouse. Pair with a C-size double-socket arm and base to complete the mount.\u003c\/em\u003e\u003c\/p\u003e","brand":"Outcamp","offers":[{"title":"Default Title","offer_id":45419732500671,"sku":"OC-QTS-001","price":18.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0250\/0532\/6384\/files\/quarter-twenty-stud-mount-01-hero.jpg?v=1777813744"},{"product_id":"universal-fish-finder-mount-plate-38mm-ball","title":"Universal Fish Finder Mount Plate with 38mm Ball — for Marine Electronics","description":"\u003cp\u003eA universal aluminium adapter plate that lets you mount almost any fish finder, marine GPS, chartplotter, CB radio or VHF unit to our Modular Mount System. Pre-drilled with multiple bolt-hole patterns to suit Garmin, Humminbird, Lowrance, Raymarine and most other marine electronics, with an integrated 38mm (1.5″) rubber ball that connects to any standard 1.5″ ball-arm.\u003c\/p\u003e\n\n\u003cp\u003eBuilt from powder-coated marine-grade aluminium so it will not rust on a saltwater boat, kayak, tinnie or jetty rod-holder setup. Pair it with one of our double-socket arms and a suction or rail base for a fully adjustable, vibration-damping mount that you can re-aim with one hand.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eUniversal bolt-pattern coverage — fits Garmin, Humminbird, Lowrance, Raymarine and most other marine displays\u003c\/li\u003e\n  \u003cli\u003eIntegrated 38mm (1.5″) rubber ball — works with any industry-standard 1.5″ ball-arm system (RAM, iBOLT, Arkon and our Outcamp Modular Mount System)\u003c\/li\u003e\n  \u003cli\u003eMarine-grade aluminium body, powder-coated black for saltwater corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eCentre cut-out keeps the plate light and clears most cable runs\u003c\/li\u003e\n  \u003cli\u003eRounded R6 edges — no sharp corners on a moving deck\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eBolt-hole patterns included on the plate\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e19 mm × 110 mm\u003c\/li\u003e\n  \u003cli\u003e31.75 mm × 72.4 mm\u003c\/li\u003e\n  \u003cli\u003e31.75 mm × 90.5 mm\u003c\/li\u003e\n  \u003cli\u003e31.75 mm × 139.7 mm\u003c\/li\u003e\n  \u003cli\u003e38 mm × 114.3 mm\u003c\/li\u003e\n  \u003cli\u003e20 × ø5.48 mm holes total\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePlate dimensions:\u003c\/strong\u003e 158 mm × 51 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePlate thickness:\u003c\/strong\u003e 5.78 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTotal height (with ball):\u003c\/strong\u003e 56 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBall size:\u003c\/strong\u003e 38.1 mm (1.5″)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePlate body:\u003c\/strong\u003e marine-grade aluminium, powder-coated black\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBall:\u003c\/strong\u003e over-moulded rubber on a steel core\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner radius:\u003c\/strong\u003e R6\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat’s in the box\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 × Universal Fish Finder Mount Plate with 38 mm ball\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003eNote: mounting screws for your fish-finder gimbal bracket are not included — most marine displays come with their own bracket hardware. The 1.5″ ball-arm and base are sold separately as part of our Modular Mount System.\u003c\/em\u003e\u003c\/p\u003e","brand":"Outcamp","offers":[{"title":"Default Title","offer_id":45419732795583,"sku":"OC-FFA-007","price":32.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0250\/0532\/6384\/files\/fish-finder-mount-plate-01-hero.jpg?v=1777850619"},{"product_id":"twist-lock-windscreen-suction-cup-mount-base-1-5-ball","title":"Twist-Lock Windscreen Suction Cup Mount Base — 1.5\" Ball (Car, 4WD, Truck, Boat, Smooth Surface)","description":"\u003cp\u003eThe Twist-Lock Windscreen Suction Cup Mount Base gives you a no-drill 1.5\" ball attachment point on any smooth, non-porous surface — car or 4WD windscreen, truck cab glass, boat console, caravan window, fibreglass canopy, or even a smooth dash panel. The 86mm rubber suction plate seats flat, and a single lever-action twist-lock pulls air out of the cup to create a powerful vacuum seal. Lift the lever to release; no marks, no residue, no holes drilled.\u003c\/p\u003e\n\u003cp\u003eThe 1.5\" (38mm) ball on top is the standard C-size used by RAM Mounts and the rest of the Outcamp Modular Mount System. Pair it with any C-size double socket arm and a C-size cradle — phone or tablet holder, GPS unit, dashcam, fish-finder display, or AMPS plate.\u003c\/p\u003e\n\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLever twist-lock vacuum:\u003c\/strong\u003e Press the lever down to evacuate air and lock the cup to glass; lift the lever 90° to release in seconds. No tools, no drilling, no adhesive.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrong, stable hold:\u003c\/strong\u003e Industrial-grade rubber suction plate rated for around 0.5 to 2kg static load — comfortably holds a phone, tablet, GPS, dashcam or small action-camera rig.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.5\" (C-size) ball:\u003c\/strong\u003e RAM Mounts compatible. Pairs with any C-size arm and cradle in the Outcamp Modular Mount range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngineered nylon body:\u003c\/strong\u003e High mechanical strength, fatigue and corrosion resistant; stands up to repeated mounting and removal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide temperature range:\u003c\/strong\u003e Performs from approx. -20°C up to 60°C — copes with hot Aussie summers and cold high-country winters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-axis adjustment:\u003c\/strong\u003e Once paired with a double socket arm, the ball gives 360° horizontal rotation and 180° tilt for full pan and angle control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustrial rubber ball:\u003c\/strong\u003e Sand-finish ball head holds tight in the socket arm without slipping.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo marks, no residue:\u003c\/strong\u003e Removes cleanly — ideal for hire cars, work utes, swap-between vehicles, or temporary mounts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBall size: 1.5\" (38.1mm) — C-size, RAM Mounts compatible\u003c\/li\u003e\n\u003cli\u003eSuction cup diameter: 86mm\u003c\/li\u003e\n\u003cli\u003eOverall height: 93mm (cup to top of ball)\u003c\/li\u003e\n\u003cli\u003eBody material: engineered nylon, high tensile and impact strength\u003c\/li\u003e\n\u003cli\u003eCup material: industrial rubber, washable\u003c\/li\u003e\n\u003cli\u003eOperating temperature: approx. -20°C to 60°C\u003c\/li\u003e\n\u003cli\u003eStatic load rating: approx. 0.5 to 2kg\u003c\/li\u003e\n\u003cli\u003eSurface requirement: smooth, non-porous, clean — glass, polished metal, gel-coat fibreglass, smooth hard plastic\u003c\/li\u003e\n\u003cli\u003eLocking mechanism: lever-action vacuum twist-lock\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eWhat's in the Box\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Twist-lock suction cup base with 1.5\" ball (single assembled unit)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eThe 1.5\" ball is the standard C-size used by RAM Mounts and the Outcamp Modular Mount System. Pair this base with any C-size double socket arm and a C-size device holder — phone or tablet cradle, GPS holder, dashcam mount, fish-finder cradle, AMPS plate, or a 1.5\"-ball-to-1\/4\" camera adapter for GoPro \/ DJI Action \/ Insta360.\u003c\/p\u003e\n\n\u003ch4\u003eWhere it works\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eCar, 4WD, ute, truck and bus windscreens (interior side)\u003c\/li\u003e\n\u003cli\u003eCaravan, motorhome and camper windows\u003c\/li\u003e\n\u003cli\u003eBoat consoles, helm panels and gel-coat fibreglass surfaces\u003c\/li\u003e\n\u003cli\u003eSmooth dash panels and centre consoles\u003c\/li\u003e\n\u003cli\u003eForklift, tractor, excavator and farm machinery cab glass\u003c\/li\u003e\n\u003cli\u003eWorkshop and showroom glass — tablet displays, point-of-sale\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor best hold, clean the surface with isopropyl wipe before mounting and check the lever weekly on long trips. Not for textured plastic, painted dash, or porous surfaces.\u003c\/p\u003e\n\n\u003cp\u003ePart of the \u003ca href=\"\/collections\/modular-mount-system\"\u003eOutcamp Modular Mount System\u003c\/a\u003e. Ships Australia-wide.\u003c\/p\u003e","brand":"Outcamp","offers":[{"title":"Default Title","offer_id":45419733844159,"sku":"VIN-C-017","price":44.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0250\/0532\/6384\/files\/twist-lock-suction-mount-01-hero.jpg?v=1777803709"},{"product_id":"1-5-ball-double-ball-extension-adapter","title":"Outcamp 1.5 Inch Ball Double Extension Adapter | Modular Mount | Australia","description":"\u003cp\u003e\u003cstrong\u003eExtend your mount setup with a second ball connection point.\u003c\/strong\u003e The 1.5\" Ball Double Ball Extension Adapter is a compact aluminium connector featuring a 1.5\" (38.1mm) C-size rubber ball at each end. Plug it into any standard double socket arm, and you gain an additional ball for attaching a second arm, device holder, or any other C-size component. Built by Outcamp for Australian conditions.\u003c\/p\u003e\n\n\u003cp\u003eWhether you need to bridge two arms, create a Y-junction for multi-device configurations, or simply add an extra pivot between components for better articulation, this adapter makes it possible without any permanent modification to your existing setup.\u003c\/p\u003e\n\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual 1.5\" C-size rubber balls:\u003c\/strong\u003e One at each end — each connects into a standard C-size double socket arm.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMarine-grade aluminium body:\u003c\/strong\u003e Lightweight yet strong, with excellent corrosion resistance for marine and outdoor use.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRubber + nylon ball heads:\u003c\/strong\u003e Composite material provides both grip and durability — tough against compression and bending without deforming.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e360-degree rotation:\u003c\/strong\u003e Each ball head rotates freely within the socket arm for full universal positioning.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompact design:\u003c\/strong\u003e Overall length of 106mm and weight of just 102g — adds minimal bulk to your setup.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eC-size compatible:\u003c\/strong\u003e Works with all 1.5\" ball mount systems including RAM-compatible components.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBall size:\u003c\/strong\u003e 1.5\" (38.1mm) C-size\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall length:\u003c\/strong\u003e 106mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 102g\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Marine aluminium body, rubber + nylon ball heads\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e All 1.5\" C-size double socket arms\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eIn the Field\u003c\/h4\u003e\n\u003cp\u003eNeed a second pivot in a long arm run for better positioning around an obstacle on your 4x4 dash? Insert the double ball adapter between two arms. Want to branch a second device off an existing arm on the boat console? Plug the adapter into a spare socket and run a second arm from it. The marine-grade construction means it handles salt spray and harsh conditions without issue.\u003c\/p\u003e\n\n\u003cp\u003ePart of the \u003ca href=\"\/collections\/modular-mount-system\"\u003eModular Mount System\u003c\/a\u003e. Ships Australia-wide.\u003c\/p\u003e","brand":"Outcamp","offers":[{"title":"Default Title","offer_id":45419734073535,"sku":"OC-C-003-2","price":34.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0250\/0532\/6384\/files\/b50bc634d2.jpg?v=1774738609"},{"product_id":"long-double-socket-arm-150mm-1-5-ball-white-powder-coated-aluminium-ram-compatible","title":"Long Double Socket Arm — 150mm, 1.5\" Ball, White Powder-Coated Aluminium (RAM Compatible)","description":"\u003cp\u003eThe 150 mm long double socket arm is the workhorse joint of any 1.5” B-size mount stack — rated for the Garmins, GPS plotters, big phones in cases, dash tablets and helm-mounted screens. This is the “medical white” powder-coated aluminium version, built for spaces where a chunky black bracket looks out of place: marine cabins, caravans, RVs, ambulance and patient transport, cleanrooms, and any bright workshop or healthcare bench.\u003c\/p\u003e\n\n\u003cp\u003eSame extra-strength locking design as the standard arm — just longer reach (150 mm centre-to-centre) and a bright white finish that disappears against painted bulkheads, ceiling pods and white interior trim. Drop it into your existing \u003ca href=\"\/collections\/modular-mount-system\"\u003eModular Mount System\u003c\/a\u003e kit when you need to bridge a longer gap or angle around a windscreen pillar.\u003c\/p\u003e\n\n\u003ch3\u003eWhy we picked it\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMarine-grade aluminium\u003c\/strong\u003e — light, strong, won’t rust on the salt\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWhite powder coat\u003c\/strong\u003e — UV stable, anti-corrosion, blends with white interiors\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRAM B-size compatible\u003c\/strong\u003e — works with any 1.5” (38.1 mm) ball head, including our existing \u003ca href=\"\/collections\/modular-mount-system\"\u003ewhite-finish base plates and clamps\u003c\/a\u003e\n\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e180° vertical \/ 360° horizontal adjustment\u003c\/strong\u003e — loosen the wing knob, find your angle, lock it down\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e150 mm centre-to-centre\u003c\/strong\u003e — longer reach to clear pillars, cabinets, awnings or instrument hoods\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLength (centre-to-centre)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e150 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBall socket size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.5” \/ 38.1 mm (RAM B-size)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMarine-grade aluminium alloy\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFinish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWhite powder coat (UV stable, anti-corrosion)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAdjustment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e180° vertical, 360° horizontal\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLocking knob\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSingle hand-tighten T-handle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhere it fits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eMarine helms, flybridges, cabin overheads — white finish disappears against painted ceilings\u003c\/li\u003e\n  \u003cli\u003eCaravans, RVs, motorhomes — bridges longer gaps from base plate to screen, away from windscreen pillars\u003c\/li\u003e\n  \u003cli\u003eAmbulance, patient transport, healthcare carts — meets the white-equipment look\u003c\/li\u003e\n  \u003cli\u003eCleanrooms, labs, bright workshops — coordinated with white walls and benches\u003c\/li\u003e\n  \u003cli\u003eAnywhere a longer 1.5” arm is needed and a black version would look out of place\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat you get\u003c\/h3\u003e\n\u003cp\u003e1 × 150 mm long double socket arm, white powder-coated aluminium, with integrated wing knob locking handle. Ball heads and base mounts sold separately — see the rest of the \u003ca href=\"\/collections\/modular-mount-system\"\u003eModular Mount System\u003c\/a\u003e for matching white-finish components.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility note\u003c\/h3\u003e\n\u003cp\u003eDesigned for 1.5” (38.1 mm \/ RAM B-size) balls. Works with any standard B-size ball head — ours, RAM, or third-party. If you’re unsure whether your existing mount uses B-size, drop us a line.\u003c\/p\u003e","brand":"Outcamp","offers":[{"title":"Default Title","offer_id":45610905108671,"sku":"OC-LDSA-150-WHITE","price":35.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0250\/0532\/6384\/files\/long-double-socket-arm-white-01-hero.jpg?v=1777812287"},{"product_id":"large-tough-claw-clamp-mount-base-1-5-ball-fits-30-70mm-bars-white-powder-coated-aluminium-ram-compatible","title":"Large Tough-Claw Clamp Mount Base — 1.5\" Ball, Fits 30–70mm Bars, White Powder-Coated Aluminium (RAM Compatible)","description":"\u003cp\u003eThe big sibling to the standard tough-claw — this large clamp swallows bars and poles from \u003cstrong\u003e30 to 70 mm\u003c\/strong\u003e in diameter, where the smaller version (26–53 mm) taps out. Same one-knob, no-drill clamp design, just a much wider jaw for the fatter pipes you actually run into in the real world: marine railings, T-tops, awning poles, scaffolding, wheelchair frames, RV exterior bars and roll cages with the bigger tube.\u003c\/p\u003e\n\n\u003cp\u003eWhite powder-coated finish to match our other “medical white” \u003ca href=\"\/collections\/modular-mount-system\"\u003eModular Mount System\u003c\/a\u003e components — built for marine cabins, healthcare carts, ambulance and patient transport, and any environment where a chunky black clamp would look out of place. Drops a 1.5” (38.1 mm \/ RAM B-size) ball straight onto whatever bar you’re working with, no tools, no drilling, no permanent mods.\u003c\/p\u003e\n\n\u003ch3\u003eWhy we picked it\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWide 30–70 mm jaw\u003c\/strong\u003e — clamps round, square and irregular bars that the standard tough-claw can’t fit\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMarine-grade aluminium \u0026amp; tough nylon body\u003c\/strong\u003e — light, strong, salt-resistant\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWhite powder coat\u003c\/strong\u003e — UV stable, anti-corrosion, blends with white interiors\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle-knob clamp\u003c\/strong\u003e — hand-tighten, no tools, no drill holes, fully reversible\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e1.5” (RAM B-size) ball\u003c\/strong\u003e — works with any standard B-size socket arm, ours or third-party\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRubber-cushioned jaw\u003c\/strong\u003e — non-slip and protects whatever bar you clamp it to\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eJaw range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e30–70 mm diameter (round, square, irregular bars)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBall size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.5” \/ 38.1 mm (RAM B-size)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBody material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTough nylon body, marine-grade aluminium hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFinish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWhite powder coat (UV stable, anti-corrosion)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMount style\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSingle-knob clamp — no drilling, fully reversible\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eJaw cushion\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRubber lining for grip and bar protection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhere it fits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMarine\u003c\/strong\u003e — helm rails, T-top frames, bimini bars, fishing rod holders — the white finish disappears against painted hardtops and railings\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWheelchair \u0026amp; healthcare\u003c\/strong\u003e — tablet and scanner holders on wheelchair frames, IV poles, medical cart uprights\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCaravan \u0026amp; RV\u003c\/strong\u003e — awning poles, exterior grab rails, ladder uprights, tow-mirror arms\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWorkshops \u0026amp; sites\u003c\/strong\u003e — scaffolding, racking, cage bars, roll cages on UTVs and side-by-sides\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAnywhere\u003c\/strong\u003e the standard tough-claw is too small for the bar and you don’t want to drill\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eBigger sibling to the standard tough-claw\u003c\/h3\u003e\n\u003cp\u003eIf your bar measures up to 53 mm and you want the smaller, lighter clamp, the \u003cstrong\u003estandard tough-claw\u003c\/strong\u003e in the \u003ca href=\"\/collections\/modular-mount-system\"\u003eModular Mount System\u003c\/a\u003e collection is the right pick. This large version takes over from there — 30 mm minimum (so it overlaps with the standard at the small end), 70 mm maximum at the big end. If you’re unsure which size you need, measure the bar diameter first.\u003c\/p\u003e\n\n\u003ch3\u003eWhat you get\u003c\/h3\u003e\n\u003cp\u003e1 × Large tough-claw clamp base, white finish, with integrated 1.5” B-size ball head and single hand-tighten knob. Socket arms and end-mounts sold separately — see the rest of the \u003ca href=\"\/collections\/modular-mount-system\"\u003eModular Mount System\u003c\/a\u003e for matching white-finish components.\u003c\/p\u003e","brand":"Outcamp","offers":[{"title":"Default Title","offer_id":45610908319935,"sku":"OC-LTC-043-WHITE","price":38.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0250\/0532\/6384\/files\/large-tough-claw-clamp-white-01-hero.jpg?v=1777813001"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0250\/0532\/6384\/collections\/u-bolt-mount-06-assembled-rig.jpg?v=1777804163","url":"https:\/\/outcamp.com.au\/collections\/modular-mount-system\/caravan-mount.oembed","provider":"Outcamp.com.au","version":"1.0","type":"link"}