One mount. Three install methods. Total Starlink Mini freedom.
The Outcamp 3-in-1 Mount is engineered for Aussies who need their Starlink Mini to go everywhere — and stay put when it gets there. Whether you're running a fixed setup on the caravan, swapping the dish between the ute and the boat each weekend, or threading the antenna through a sunroof to keep it out of the weather, this is the only mount you'll need.
Built from precision CNC-cut, marine-grade HDPE — not 3D printed like the cheap stuff — and finished with an ultra-durable hardtop cover that takes hail, branches, and anything else the outback throws at it.
Built for the way you actually travel
-
4WDers and overlanders — magnetic mode locks straight onto the steel roof, no drilling, no sealant, no holes to regret later
-
Caravanners and motorhome owners — flat-mount permanently to the roof, or use suction cups for a quick deploy at camp
-
Boaties and yacht owners — suction cups grip fibreglass, glass and painted panels where magnets cannot
-
Tradies and remote workers — pull it off one vehicle, slap it on another, take it home at the end of the week
-
Sunroof setups — flip the dish 180° to mount inside the cabin pointing up through glass, perfect for keeping the unit secure and theft-protected
Three mounting modes in the box
-
Flat mount — bolt straight to the roof for permanent installs on RVs, trailers, fixed setups
-
Magnetic mount — four large rubber-coated, high-strength magnets grip steel surfaces with over 150 pounds of holding force, no paint damage
-
Suction mount — four industrial vacuum suction cups for glass, fibreglass, plastic, and any smooth painted surface
Specifications
-
Material: High-impact marine-grade HDPE (CNC machined, not 3D printed)
-
Hardtop cover: Impact-resistant, full coverage protection for the Starlink Mini
-
Magnetic holding force: Over 150 lb (~68 kg) combined across four rubber-coated magnets
-
Suction system: Four industrial vacuum cups with red-line indicator
-
Compatibility: Starlink Mini dish
-
Colour: White body with black hardware
-
Surfaces: Steel (magnetic), glass / fibreglass / smooth painted surfaces (suction), or any flat panel (bolt-down)
What's in the box
- 1 × main mount body with hardtop cover
- 4 × rubber-coated magnetic bases
- 4 × industrial vacuum suction cup assemblies
- 10 × stainless steel screws
- 1 × hex driver / Allen key
- 1 × instruction manual
Frequently asked
Will the magnets damage my paint?
No — the magnets are fully rubber-coated. The contact face never touches paint directly. We still recommend a clean surface before mounting.
Can I leave it on the suction cups while driving on rough roads?
The suction system is rated for use in motion, but as with any suction mount we recommend checking the red-line indicators before each leg of a trip and re-pumping if needed. For high-speed highway use on smooth glass it's rock-solid; for corrugated outback tracks the magnetic or bolt-down modes are the safer choice.
Does the hardtop cover affect signal?
The cover is engineered specifically for the Starlink Mini's antenna pattern — no signal interference, full hail and impact protection.
Ships from Australia via Australia Post. Backed by Outcamp 12-month warranty.
