Power Your Starlink Mini Directly From Your Vehicle
Plug into any 12V or 24V cigarette lighter socket and get instant, stable 30V power for your Starlink Mini. This purpose-built DC step-up converter eliminates the need for bulky inverters or battery packs - just plug in and get online.
Built into an entirely aluminium housing with a ribbed, knurled barrel, it runs cool under sustained 60W load and survives the heat of a dash in summer. A three-second press of the top button switches power on or off, and the LED voltmeter on the face shows live output so you always know the dish is getting a clean 30V.
Key Features
-
True Plug-and-Play 30V Output - Converts any 12V/24V cigarette lighter socket to a stable 30V/2A (60W) output. No inverter needed - just plug in and power your Starlink Mini instantly
-
Built-In Step-Up Converter - Integrated DC-DC voltage booster lifts 12V-24V input to a regulated 30V, preventing restarts and dropouts caused by voltage sag or fluctuating alternator output
-
Live LED Voltmeter - The display on the face reads actual output voltage (for example 30.6V) so you can confirm power delivery at a glance before you rely on it
-
Three-Second Power Button - Press and hold for 3 seconds to switch on or off. Deliberate activation means no accidental bumps in the socket, and you can cycle the dish without unplugging
-
Entirely Aluminium Housing - Machined aluminium body and ribbed barrel dissipate heat efficiently, holding full 60W output in sustained use and staying comfortable to handle
-
Anti-Slip Rubber Gasket - The textured collar gives grip for easy plug and unplug, even with dusty or gloved hands
-
Dust-Proof Cap - The DC output socket is covered when not in use, keeping out dust, grit and moisture between trips
-
Triple Protection System - Short circuit, overheat and overcurrent protection built in. Rated for -20C to 60C operating temperature
-
Locking Cigarette Lighter Plug - Spring-loaded side contacts hold the adapter firmly in the socket so it stays connected on corrugated tracks and rough roads
Specifications
| Compatibility |
Starlink Mini ONLY |
| Input Voltage |
12V - 24V DC (cigarette lighter / accessory socket) |
| Output |
30V / 2A (60W) regulated DC |
| Connector |
DC barrel plug, 5.5mm - moulded cable, approx. 0.5m |
| Display |
LED voltmeter, live output voltage readout |
| Switch |
Top button, press and hold 3 seconds for on/off |
| Housing |
Entirely aluminium alloy, ribbed barrel, anti-slip rubber gasket |
| Colour |
Black |
| Weight |
130g adapter / 230g gross with packaging |
| Packaging |
Boxed, approx. 15 x 15 x 5cm |
| Operating Temp |
-20C to 60C |
| Protection |
Short circuit / Overheat / Overcurrent |
| Certification |
CE / RoHS / FCC marked |
Use Cases
-
4WD Touring - Power your Starlink Mini from the cigarette lighter while driving or parked at camp. The locking plug stays connected on rough tracks
-
Caravans and RVs - Plug into your 12V or 24V accessory socket for internet on the road without draining your house battery through an inverter
-
Boats and Marine - Works with standard 12V and 24V marine electrical systems, with a capped socket when the dish is packed away
-
Trucks and Tradies - Keep your Starlink Mini powered at remote worksites directly from the vehicle, and check the live 30V readout before you start a call
Starlink Mini dish sold separately. This adapter is designed exclusively for the Starlink Mini - it will not fit Standard, Performance, or Gen 2/3 models.